Outdoor Structures Australia name
Outdoor Structures Australia name Layout buffer

Decking Accessories

Please note: The Outdoor Structures Australia Guide to using the correct decking preparation Surface Coating Guide

Deckwood Screws 14# x 85mm 304 stainless

Suitable for 35 and 45mm Deckwood Outdoor Structures Australia has these screws specially in Australia. They are different to the normal screw (many of which are imported) as they have:

  • a smaller head to fit countersinking tools
  • extra thread to suit 35mm decking; and…
  • wax coated for easier driving into hardwood.

We also stock 60, 75 and 100mm screws which we generally use for special applications.

Box quantity is 500. Box weights are:

  • 75mm 6kg
  • 85mm 7.25 kg
  • 100mm 9kg (sometimes packed in lots of 250)

LifePlus® screw 10# x 50 304 stainless

LifePlus® stainless decking screwsSuitable for LifePlus® and domestic hardwood and pine decking. Can be used on hardwood or pine joists ex 50mm. Box quantity is 500 (Weight 2.4 kg).

Installation Instructions ›

Malthoid

MalthoidMalthoid is recommended for use on domestic and commercial joists and is stocked in:

  • 110mm width, 4kg weight
  • 150mm width, 6kg weight
  • 300mm width, 12kg weight

The roll length is 20m.

CN Emulsion

CN EmulsionRecommended for applying on all to timber interfaces, as a water repellent on top of the malthoid and sealing the end grain.

Available in 20 litre only. See your local hardware store for 4 litre containers.

Technical Data Sheet › (40KB PDF)
Material Safety Data Sheet (Available on request)

CN Oil 

CN OilRecommended as the first coating for commercial decking such as boardwalks. Where the oil may be an issue e.g. walking over carpets after coming in from the deck Tanacoat should be used initially.

Available in 20l, 200l and Deckwood and Joistwood is available with the oil pre applied.

Available in 20 litre only. See your local hardware store for 4 litre containers.

Technical Data Sheet › (76KB PDF)
Material Safety Data Sheet (Available on request)

TANACOAT

TANACOAT from Outdoor Structures Australia
Go to TANACOAT timber finish ›

TANACOAT is a high flash point solvent based, clear coating that enhances timber grain while providing protection against sunlight and moisture.

Whether through UV effects or water absorption, exterior timber surfaces suffer premature degredation. TANACOAT has been developed as a maintenance protection system for weather exposed timber structures.

Above products as available for pruchase through the www.wilsontimbers.com › web site.

 

Resource: www.outdoorstructures.com.au/decking_accessories.php Printed: 2024-03-29.