Outlasts and Outperforms
CCA Timber Treatment
The purpose of CCA (Copper Chromium Arsenate) Treatment of timber is to protect the Sapwood of timber from insect attack and fungal decay.
"Sapwood" is the outer ring of young growing wood, and "Heartwood" (or "Truewood") is the middle ring of mature wood. "Heart" (or "Pith") is the dead wood at the centre of the tree. Hardwood has a large band of Heartwood and a small band of Sapwood, whereas common Pine species such as Radiata, have a small band of Heartwood and a large band of Sapwood. The different proportions of Sapwood and Heartwood in Pine and Hardwood influence the protection afforded by CCA treatment.
Sapwood and Heartwood generally are regarded as having similar strength properties. However, the Sapwood of timber has less natural resistance to insect attack and fungal decay than the Heartwood of the same species (with the relative difference varying between species).
The Treatment process involves the Sapwood being impregnated with preservative by the VPI (Vacuum Pressure Impregnation) process in specially designed treatment plants. Once the solution has penetrated the Sapwood, the elements are chemically fixed into the timber and are highly resistant to leaching out.
The protection achieved by this process, due to the complete penetration of the Sapwood by CCA, cannot be matched by "paint on" preservatives. The concentration of CCA can be varied depending on the conditions under which the timber will be used. The conditions are categorised by "Hazard levels" and are described as:
Hazard Level 1 - Above ground and protected
Hazard Level 3 - Above ground and exposed
Hazard level 5 - In ground and exposed
Timber should be branded with a number which identifies the chemical used, treatment plant, and hazard level. Wherever possible, this brand should not be cut off. Alternatively, a certificate can be supplied to certify that the timber has been treated to the purchaser's requirements.
CCA Treatment is effective in most of the common Hardwood species and many of the common Pine species.
Pine which is supplied for landscaping (principally Radiata and Slash) is normally plantation thinnings, and being young growth, is almost wholly Sapwood. Hence, when treated, it is resistant to insect attack and fungal decay, but will still exhibit normal pine properties .
"Peeler Cores", the centre of large pine logs used for plywood manufacture, are almost wholly Heartwood and although resembling "constant diameter" posts, they cannot be treated, and will decay very quickly when in contact with the ground or in moist conditions. CCA Treatment is also not effective in Cypress Pine, Oregon (Douglas Fir) and Bunya Pine, (amongst others).
It is illegal to attempt to treat species for which the process is not effective. Attempting to treat such species gives the impression, by the green stain on the outside, that the timber has been effectively treated and will be durable (which is not the case).
Even in treatable species, CCA will only penetrate (and treat) the Sapwood, but will not penetrate, or improve the properties of, Heartwood. Hence:
If left unprotected, CCA treated timber will, in the long term, deteriorate due to the effects of the weather (water, ultra-violet light, heat and cold). Weathering results in a slow breaking down and wearing away of surface fibres, a change in colour and roughening of the surface. The extent of weathering will vary with timber species, and the loss of approximately 6mm of timber per 100 years can be expected.
For satisfactory long term performance, it is still necessary to protect CCA treated timber against weathering, with a suitable paint, stain, or oil system. Surface chemical should be washed and brushed off, (as is good practice with any dusty surface), so as not to affect paint adhesion or stain penetration.
The mechanisms of premature deterioration of Sapwood that can be prevented by CCA treatment are:-
1. INSECT ATTACK
When treated, the Sapwood is protected from insect attack, due mainly to the arsenic component of CCA.
Timber can be attacked by a wide variety of insects. One of the most common is the Subterranean Termite, and protection is focused mainly on physical and chemical barriers to prevent access to the structural timber.
The Sapwood of treated timber is protected against attack by termites. However the Heartwood is no more resistant to termite attack after treatment than before. Once the surface of the Heartwood (which may contain a small amount of CCA) has been penetrated, the termites are free to attack the timber as they normally would.
CCA in this case may discourage termites, and if there is other edible material nearby, eg. mouldings, their presence may become apparent before structural damage is done.
CCA treatment does not make timber "termite proof" as is commonly believed (particularly with regard to sawn posts).
Another common and destructive insect is the Lyctus Borer (or powder post beetle). The larvae of this insect attacks only the Sapwood of some Hardwoods, particularly Spotted Gum, (feeding on the starch) and leaves tunnels packed with "frass" (waste product). Attack on untreated "Lyctus susceptible" Sapwood will continue until it is destroyed. It is required, by law, that timber containing "Lyctus susceptible" Sapwood be treated before supply, unless it has been requested, in writing, that such timber be supplied untreated.
It is not required that timber from a Lyctus Susceptible species be treated if there is no Sapwood present, i.e. it has been cut "clean".
2. FUNGAL DECAY
When treated, the sapwood is protected from fungal attack, due mainly to the copper component of CCA.
Fungi need moisture, oxygen, warm temperatures, and nutrients such as the sugars and carbohydrates found in sapwood, to grow and break down the cell walls. This is generally referred to as rotting. Timber containing Heartwood only, or with Sapwood, which is dry and kept dry, e.g. floor joists and bearers in well ventilated floor spaces, will not deteriorate due to fungal decay.
Timber subjected to periodic wetting and drying, eg. verandah joists and bearers, will experience faster decay in the sapwood than the heartwood, It is advisable to treat any timber containing (non lyctus susceptible) Sapwood where dry conditions cannot be guaranteed, and longer life is required than would be expected from untreated timber.
The use of CCA Treatment has been very effective in producing more durable timber (particularly in "wet and dry" situations) and in improving the recovery of useable timber from Lyctus susceptible species. This has aided the efficient utilisation of an important natural resource.
CCA acceptable use A 300KB PDF (Where CCA can and cannot be used)
Industry Guide to the sale of CCA-Treated Timber Products after March 2006
Return to start of Timber Preservative Information
Copyright © 1999-2013 Outdoor Structures Legals Privacy Site by: IDO
URL: www.outdoorstructures.com.au/preserve_2.php Printed 22-05-2013